Ninja H2 banner

Removing tank protector

413 Views 6 Replies 4 Participants Last post by  2021Kawasakih2
Got a 2015 H2, and the previous owner had a tank protector. I’d like to remove the tank protector as I don’t like it. Any idea if this can be done safely, or am I best to leave it on as the paint is very delicate. A protector like this…


See less See more
1 - 1 of 7 Posts
Just use a hair drier on low to medium heat setting, and low to medium speed. Move it around over the tank pad, not just in one area. After a few minutes gently pick on one edge of the pad and slowly peel it back. Keep the hair drier working if needed, but usually it should be warm enough after a few minutes. Once the pad is off remove any gum residue (I've used WD40 with fairly good results in the past). Hope this helps.

Exactly how I would do it
1 - 1 of 7 Posts